Optigo CS (phased-out)

Optigo CS (phased-out)

Optigo CS is a commercial air cooler for general application in small to medium-sized cooling and freezing rooms. The model's design is characterised by a low silhouette (only 15 cm for CS200) for the efficient use of cold room space. Optigo CS coolers are available from stock.

Main characteristics Optigo CS

Standard configuration

  • Innovative coil manufactured from internally grooved Cu tubes (smooth tubing for brine applications) and aluminium fins. Tube pitch 30x26 mm staggered. Standard fin spacings 4 and 7 mm.

  • Durable aluminium alloy casing, white epoxy coated RAL 9002. Hinged drip tray construction. Pre-cut passages for multiple choice connections (both sides & top). All models fitted with a T-connection for better refrigerant distribution and optional hot gas defros. CS200 is also available with a drip tray for wall mounting.

  • Standard fitted with plug-in dual fan speed EC motors in two diameters (200 & 300 mm), blowing through the coil. Fans pre-wired to the connection box. Power supply 230/1/50-60. Enclosed design spray-tight fan motors, protection class IP-44.


For a full overview of all available options and additional technical specifications please refer to the product leaflet. Optigo CS (phased-out)

How it works

Alfa LU-VE finned coil air heat exchangers have been designed to achieve an optimized exchange of thermal energy between air and a refrigerant or fluid. The ‘heart’ of our air heat exchangers is the finned coil, built up from a circuit of interconnected tube serpentines and fins to increase the heat exchanging surface. Thanks to the combination of key design variables (coil materials, coil geometry, casing design, fan type), air units are very versatile heat exchangers with a great variety of applications in many industries. Alfa LU-VE supplies finned coil air heat exchanger products for a wide variety of applications.

Air coolers & air-cooled condensers

Air coolers and air-cooled condensers are key components in air cooling and air conditioning systems. On the refrigerant side the most common media are a brine or an evaporating refrigerant like HFO/HFC, ammonia or CO2. A chilled brine may be supplied from a chiller that is potentially located far away, but a liquified refrigerant must come from a nearby condensing unit. When an evaporating refrigerant is used, the cooling coil is the evaporator in the vapour-compression refrigeration cycle (‘direct expansion’ or ‘DX’ system).

  • Evaporating temperatures: +10 to -30 °C
  • Refrigerants: all HFO/HFC, brine, CO2
  • Capacities (SC2): 550 up to 7,810 W
  • Air volume: 380 up to 3,800 m3/h
Selection tools
These air heat exchanger products can be configured and selected using our online selection tool Plair.
Mobile app for iOS & Android to calculate the expected heat load for your cold room.
  • Sufficient space for expansion valve inside casing.
  • Eurovent certified performance (CSE models only).
  • T-connection for hotgas in coil.
  • Energy efficient EC plug-in fans.
  • Fans pre-wired to the connection box.