Main characteristics Arctigo ID
- 3 coil block modules
- 3, 4, 6, or 8 tube rows deep
- Tubing ø 5/8”Cu ripple fin, smooth Cu tubing for brine or smooth stainless steel
- Tube pitch 50 mm square
- Corrugated Alu-fins
- Fin spacings 4, 5, 6, 7, 8, 10 and 12 mm
- 1 to 5 AC or EC fans, ø 450, 500 & 630 mm, blowing through the coil. 2-Speed AC/EC fan motors 400/50-60/3 or EC 230/50-60/1.
Fan motors with dynamically and statically balanced external rotors, protection grade IP54 or IP55. Integrated thermo contacts (Clickson) provide reliable protection against thermal overload.
- Corrosion resistant materials: coil frame and casing pre-galvanized sheet steel, epoxy coated RAL 9003.
- Hinged side panels and driptray, vertical drains aluminium 1½" BSP ext.
- Fitted with schräder valve on the suction connection for testing purposes (brine units excluded).
- Suitable for dry expansion or pumped system.
- Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with use of a forklift.
For a full overview of all available options and additional technical specifications please refer to the product leaflet.
How it works
Alfa LU-VE finned coil air heat exchangers have been designed to achieve an optimized exchange of thermal energy between air and a refrigerant or fluid. The ‘heart’ of our air heat exchangers is the finned coil, built up from a circuit of interconnected tube serpentines and fins to increase the heat exchanging surface. Thanks to the combination of key design variables (coil materials, coil geometry, casing design, fan type), air units are very versatile heat exchangers with a great variety of applications in many industries. Alfa LU-VE supplies finned coil air heat exchanger products for a wide variety of applications.
Air coolers & air-cooled condensers
Air coolers and air-cooled condensers are key components in air cooling and air conditioning systems. On the refrigerant side the most common media are a brine or an evaporating refrigerant like HFC, ammonia or CO2. A chilled brine may be supplied from a chiller that is potentially located far away, but a liquified refrigerant must come from a nearby condensing unit. When an evaporating refrigerant is used, the cooling coil is the evaporator in the vapour-compression refrigeration cycle (‘direct expansion’ or ‘DX’ system).
*not covered by Eurovent certification