Main characteristics Fincoil FBL
Standard configuration
- FBLG* ranges
- FBLGS = standard unit width (2.6 m)
- FBLGC = container unit width (2.3 m)
- FBLGE = custom coil width
- FBLGA = special coil configuration
- FBLGY = stainless steel tubing
- FBLGM = ASME design (dedicated product leaflet available)
- FBLM* ranges
- FBLMS = standard unit width (2.6 m)
- FBLMC = container unit width (2.3 m)
- Finned coil
- Copper or stainless steel tubes (FBLGY)
- Corrugated Al-fins 0.18 mm, no turbulators
- Fin spacing 2.3 to 4 mm
- Direct driven axial fans, suitable for use with frequency converters. When designing a frequency converter system, the general guidelines for allowed cable lengths, sinus filters, dU/dT filters etc. have to be considered.
- Fan motors available for various power supplies. The motors are squirrel-cage motors for outdoor use built to IEC standards and provided with condensing water outlets and shaft seals together with H-class insulation. Protection class for motors is IP55, except for the condensing water outlets. The motors are prewired to lockable service switches.
- Fan diameters 1.2 or 1.8 meter.
- All casing parts are hot dip galvanized steel or pre-coated galvanized sheet steel.
- Specifically designed for multiple installations with several radiators installed side by side.
- Fitted with header tube protection panels.
- Manual venting and draining valves.
- Partitions between fans for regulation of the cooler capacity by means of separate use of the fans.
- Transportation either in wooden seaworthy packing or standard 40'/45’ container. Also suitable for truck transportation.
Options
For a full overview of all available options and additional technical specifications please refer to the product leaflet.
How it works
Alfa LU-VE finned coil air heat exchangers have been designed to achieve an optimized exchange of thermal energy between air and a refrigerant or fluid. The ‘heart’ of our air heat exchangers is the finned coil, built up from a circuit of interconnected tube serpentines and fins to increase the heat exchanging surface. Thanks to the combination of key design variables (coil materials, coil geometry, casing design, fan type), air units are very versatile heat exchangers with a great variety of applications in many industries. Alfa LU-VE supplies finned coil air heat exchanger products for a wide variety of applications.
Air-cooled liquid coolers (radiators/dry coolers)
Air heat exchangers may be used to cool various process liquids. For this application hot process liquid flows through the tubes. This liquid is cooled by the relatively cold ambient air that is forced through the coil.
Air heat exchangers for process liquid cooling are referred to as 'radiators'. Air-cooled liquid coolers for HVAC applications and total energy systems are referred to as 'dry coolers'.